Finding local answers to fuelwood problems

This paper presents an analytical approach to the identification of characteristic fuel-wood situations in developing countries. This approach recognizes the tension between achieving a level of generalization needed for policy formulaion and the need to capture the specifics of fuelwood production and use at a local level. A typology, based on environmental and socioeconomic criteria, is advanced which is intended to form the basis of a refining of policy principles to the specifics of different localities. A series of brief case studies is presented to illustrate the characteristics of different types of locality, and conclusions of the future direction of fuelwood policy are advanced.     

APPLICATION OF THE GREEN-AMPT INFILTRATION EQUATION TO WATERSHED MODELING1

ABSTRACT: A computer model was developed, based on the Green-Ampt infiltration equation, to computed rainfall excess for a single precipitation event. The model requires an estimate of parameters related to hydraulic conductivity, wetting front section, and fillable porosity of the soil layers. Values of parameters were estimated from soil textural averages or regression equations based on percent sand, percent clay, and porosity. Average values of effective porosity and wetting front suction were largely acceptable due to the relatively low variability and low model sensitivity to the parameters. Hydraulic conductivity was the most erratic constituent of the loss rate computation due to the high variability and the high sensitivity of the computed infiltration to the parameter. The performance of the Green-Ampt infiltration model was tested through a comparison with the SCS curve number procedure. Seven watersheds and 23 storms with precipitation of one inch or greater were used in the comparison. For storms with less than one inch of rainfall excess, the SCS curve number procedure generally gave the best results; however, for six of the seven storms with precipitation excess greater than one inch, the Green-Ampt procedure delivered better results. In this comparison, both procedures used the same initial abstractions. The separation of rainfall losses into infiltration, interception, and surface retention is, in theory, an accurate method of estimating precipitation excess. In the second phase of the study using nine watersheds and 39 storms, interception and surface retention losses were computed by the Horton equations. Green-Ampt and interception parameters were estimated from value sin the literature, while the surface retention parameter was calibrated so that the computed runoff volumes matched observed volumes. A relationship was found between the surface retention storage capacity and the 15-day antecedent precipitation index, month of year, and precipitation amount.     

Techniques for rapidly evaluating the progress of in-situ remediation

Although standard methods of monitoring the progress of in-situ remediation may provide general results for the most permeable zones affected by soil vapor extraction or bioventing, they are essentially unsuccessful at providing information on the degree of heterogeneity within the remediation zone and on the existence of “hot spots.” Data are presented that suggest that monitoring the concentrations of fixed and biogenic gases and measuring soil permeability on a small-scale basis may circumvent the common problems associated with assessing the progress of in-situ remediation. The costs of these monitoring techniques are minor compared to those of designing and operating an in-situ remediation system, and may save additional time and costs by identifying problem areas early in the cleanup process.     

Pneumatic fracturing to remove VOCS

A new process for enhancing in-situ remediation of low-permeability soil and rock formations is presently under development at the Hazardous Substance Management Research Center (HSMRC). The patented process, known as ?pneumatic fracturing,”? consists of injecting high-pressure air or other gas into contaminated geologic formations at controlled flow rates and pressures. In fine-grained soils such as clay, pneumatic fracturing creates conductive channels in the formation, thereby increasing the permeability and exposed surface area of the contaminated soil. The potential benefits of pneumatic fracturing are significant, since in-situ remedial technologies are essentially limited by the pore gas exchange rate of the soil being treated. This article describes the results of a recent demonstration of pneumatic fracturing at an industrial site to enhance a volatile organic compound (VOC) extraction system. After establishing the baseline removal rate of soil gas effluent from the clay, soil surrounding the extraction system was fractured to enhance VOC with drawal. A substantial improvement in the VOC removal rate was observed, including: (1) flush effluent concentrations that increased up to 200 times; and (2) air flows in the formation that increased up to 1,000 times.     

Protecting the piping plover under section 7 of the endangered species act

Section 7(a)(2) of the Endangered Species Act directs federal agencies to ensure that their actions do not jeopardize the continued existence of endangered and threatened species. The US Fish and Wildlife Service (USFWS) issues jeopardy or nonjeopardy biological opinions on proposed federal actions that affect endangered and threatened species. We summarize several biological opinions issued by the USFWS to protect the threatened piping plover (Charadrius melodus). These opinions address federal actions involving hundreds of piping plovers on the Missouri River system and a few piping plover pairs on short stretches of Atlantic coast beach. Some of these opinions are decisive, but most allow the proposed action to proceed conditional upon a lengthy set of reasonable and prudent alternatives to protect the piping plover. These conditions may prove difficult to track and will add to the workload of the USFWS.     

National parks: north of the border

This paper traces the history of attempts to introduce National Parks into Scotland. In so doing it identifies some of the alternatives that have been considered and adopted. Finally, the paper analyses the failure of the movement to introduce National Parks into Scotland.     

An inventory of wetland impoundments in the coastal zone of Louisiana,USA: Historical trends

We inventoried wetland impoundments in the Louisiana, USA, coastal zone from the late 1900s to 1985. Historically, impoundment of wetlands for reclamation resulted in direct wetland loss after levees (dikes) failed and the impounded area was permanently flooded, reverting not to wetland, but to open-water habitat. A current management approach is to surround wetlands by levees and water control structures, a practice termed semi-impoundment marsh management. The purpose of this semi-impoundment is to retard saltwater intrusion and reduce water level fluctuations in an attempt to reduce wetland loss, which is a serious problem in coastal Louisiana. In order to quantify the total impounded area, we used historic data and high-altitude infrared photography to map coastal impoundments. Our goal was to produce a documented inventory of wetlands intentionally impounded by levees in the coastal zone of Louisiana in order to provide a benchmark for further research. We inventoried 370,658 ha within the coastal zone that had been intentionally impounded before 1985. This area is equal to about 30% of the total wetland area in the coastal zone. Of that total area, approximately 12% (43,000 ha) is no longer impounded (i.e., failed impoundments; levees no longer exist or only remnants remain). Of the 328,000 ha still impounded, about 65% (214,000 ha) is developed (agriculture, aquaculture, urban and industrial development, and contained spoil). The remaining 35% (114,000 ha) of impoundments are in an undeveloped state (wetland or openwater habitat). In December 1985, approximately 50% (78,000 ha) of the undeveloped and failed impoundments were open-water habitat. This inventory will allow researchers to monitor future change in land-water ratios that occur within impounded wetlands and thus to assess the utility of coastal wetland management using impoundments.     

Overview of case studies on recovery of aquatic systems from disturbance

An extensive review of the published literature identified more than 150 case studies in which some aspect of resilience in freshwater systems was reported. Approximately 79% of systems studied were lotic and the remainder lentic. Most of the stressor types were chemical with DDT (N=29) and rotenone (N=15) the most common. The most common nonchemical stressors were logging activity (N=16), flooding (N=8), dredging (N=3), and drought (N=7). The variety of endpoints to which recovery could be measured ranged from sparse data for phytoplankton (N=13), periphyton (N=6), and macrophytes (N=8) to relatively more data for fish (N=412) and macroinvertebrates (N=698). Unfortunately the same characteristics were rarely measured consistently among sites. For example, with respect to fish, more than 30 different species were studied and recovery was measured in many ways, most commonly on the basis of: (1) first reappearance of the species, (2) return time of predisturbance densities, and (3) return time of predisturbance average individual size. Based on these criteria, all systems in these studies seem to be resilient to most disturbances with most recovery times being less than three years. Exceptions included when (1) the disturbance resulted in physical alteration of the existing habitat, (2) residual pollutants remained in the system, or (3) the system was isolated and recolonization was suppressed.